Saturday, September 19, 2009

897

A Colorless Thermoplastic Peek Polyetheretherketone
A polymer obtained by step growth process of polymerization is a colorless thermoplastic called peek polyetheretherketone. Due to its high melting point it has outstanding chemical, electrical properties. It can only be attacked by some of the acids and compounds at the higher temperature. Peek is a tough material so that it can be used in the applications where strength is needed like insulation of wires, pumps, bearing etc. It absorbs very less water as it is water resistance material. Due to its high bearable temperature it has good chemical confrontation or less reactive. Up till high temperature i.e. 250°C it doesn’t loose its properties and remain the same. It is not affected by an exposure to hot steam for a continuous time period.

There are many standards of peek polyetheretherketone available. One is the peek which is unfilled which is unbreakable means high strength and also malleable and ductile. It is available in sheets or in form of rods. Another is the filled that is glass filled which has more strength. It augments the flexural modulus and decrease the expansion rate. It is in brown color. Another is carbon filled which increases the rigidity of the peek. It is black in color.

09t

Peek Polyetheretherketone High Performance Thermoplastic

A thermoplastic with high performance is polyetheretherketone. It is less toxic as compared to other when burned. Peek polyetheretherketone has some of the properties like it is semi crystalline, outstanding electrical properties so there is no need of additives. It has a high melting point. It is also water resistance. Polyetheretherketone also called PEEK. Crystalline part can be achieved by using a hot mold. Removal of peek permits to view the change of color to a colored solid from a semi transparent material. If the mold is not hot then the part becomes colorless. The temperature can be checked using a thermocouple which is highly recommended.
The peek mold must be developed for the high temperature practice along with insulators, draft etc. Peek is a costly material due its qualities. At the time of molding peek safety measures must be taken like hand gloves, face guard and eye glasses must be worn. It follows all the principles of thermoplastics, so all those principles must also be considered. The resin used must have the needed properties and also must be dry without any filler in it. It must be properly analyzed to assure its dryness. There are different grades or standards of peek available.

ruchi

Diecast Collectables Can Be a Hobby

For the collectors a new range of toys that are required or wanted or asked usually are the Diecast collectables. These are the small cars, trucks etc. They are made up of metals and good quality plastic. At the time of the world war the toys were replicated like the equipments used for fight, which became very popular during that period of time. The equipments for fight were like jeeps, ships etc. With time the quality of these diecast toys are improved and the old forms were stored as the classic material. In the recent time there are many brands launching it with different looks and features in the market.
The complete collection has more value than of the single diecast. These were introduced as the set so it remains in its value when it is a complete set. There are different sizes of it available and prizes go according to the size means as the size increases the prize also increases. Some of the toys that have some special features are mostly expensive. Collecting diecast with different available models can be a hobby for some people which are really enjoyable. The collectors assure that there collection is same so they generally keep them in cases.

ruchi

A Small Town Called Arlon
Belgium town that is the capital of Walloon is arlon. German language is often used by most of the people of Arlon. This territory was established by a tribe that was a hybrid of German plus Celtic. The culture of Arlon is like that of the roman culture in fact was the same. More knowledge is gained about the medieval period by digging up the earth from where all the stones, equipments, and other things were extracted. At that time that area was highly developed before the third century when every thing was destroyed due to destroyed.
Arlon was then occupied by France in a revolution. Arlon is currently a residential area that is expanding its areas in residence and commercial field. It is developing its marketable zone. Across the border many people are coming for work mainly in a famous chocolate factory of Arlon. It has its railway station were all the trains whether national or international stops. One of the best archeological museum which has the worlds best and the highest collection is also found in the small town arlon. A small part of the wall that is the defensive wall is still present in Arlon that was made in the 3rd century.